Glo-Toob Specification & Operation
MASS: 0.075lb / 34 grams
DIMENSIONS: 2.75" x 0.75" / 70mm x 19mm
BUOYANCY: negative
PRESSURE RATING: 11,500' / 3,500 metres
VIEWING ANGLE: 360 degrees
WORKING TEMPERATURES: -4 to 176 Degrees Fahrenheit / -20 to 80 Degrees Celsius
BATTERY TYPE: 12V (23A) Super Alkaline
BATTERY LIFE: Approx. 30 - 80 hrs (dependant on mode selection)
LIGHT SOURCE: ultra high bright LED's (cold light)
DURABILITY: high impact resistant
SWITCH TYPE: twist
ATTACHMENT: stainless steel split ring
SEAL TYPE: 2 x "O" rings (nitrile)
MATERIALS: anodised aluminium & high resistant epoxy
COLOURS: Red, amber, blue, green, white
BURN TIME: LED life approximately 100,000 hours
OPERATIONAL MODES:equal flash, beacon strobe, slow strobe, SOS, throb, 100% constant on, 25% constant on.
GLO-TOOB FX OPERATION
The new GLO-TOOB FX allows you to select 1 of its 7 modes as your LOCKED mode.This LOCKED mode is the mode the unit will activate when you turn it on. In order to select ot modify your LOCKED mode, follow these simple steps.
STEP 1:
Switch the GLO-TOOB FX on - count 5 seconds and then switch the unit off and then on again (this will activate the LOCKED mode programming sequence).
STEP 2:
Now, by repeatedly turning the unit on and off you will cycle through the 7 different pre-programmed modes.
STEP 3:
In order to select and store a new LOCKED mode, leave the unit on that particular mode for 4 seconds or longer.
When you switch the unit off and on again, it will activate your new LOCKED mode. Repeat STEPS 1-3 if you would like to change your LOCKED mode again
|
|
